Wall Plate AP - Dual radio (802.11 b/g/n/ax 2x2 MU-MIMO and 802.11 a/n/ac/ax 2x2 MU-MIMO), internal antennas, 4 x 10/100/1000 RJ45 port (1x 802.3at Po

Type of equipment Stenjek for home / desktop AP Number of radios 3+1 BLE Number of antennas 4 single-band Wi-Fi + 1 dual-band scan + 1 single-band BLE/ZigBee 2.4GHz Antenna type and maximum gain Antenna on the printed circuit board Dual-band 4.0 dBi in the 2.4GHz band and 4.0 dBi in the 5 GHz band 3.5dBi BLE antenna in the 2.4GHz band Frequency bands (GHz) 2,400–2,4835, 5,150–5,250, 5,250–5,350, 5,470–5,725, 5,725–5,850 Radio 1 Features 2.4GHz frequency range Channel width 20/40 MHz Modulation BPSK, QPSK, 64/256/1024 QAM MIMO Chains 2x2 Service Radio 2 Features Frequency range 5.0 GHz Channel width 20/40/80 MHz Modulation BPSK, QPSK, 64/256/1024 QAM MIMO Chains 2x2 Service Radio 3 Features The frequency bands are 2.4GHz and 5.0 GHz. Chains MIMO scanning of the 1x1 frequency. Maximum data transfer rate Radio 1 up to 574 Mbps Radio 2 up to 1200 Mbps Radio 3 frequency scan only Bluetooth with low power consumption Bluetooth scanning and iBeacon advertising at a maximum transmission power of 10 dBm Interfaces 7 10/100/1000 Base-T RJ45 ports (1x 802.3 at PoE (PD), 1x 802.3 af PoE (PSE), 2x Non-PoE ports, 1x End-to-end input, 1x end-to-end output, 1x RS-234 Power supply via Ethernet (PoE) 1 x 802.3 at PoE by default Operating modes power supply 802.af PoE – radio communication; powered by 802.3 at – all radios+PSE (7W); Powered by DC adapter – all radios + USB + PSE (802.3 af) Simultaneous SSIDs Up to 16 (14 if background scanning is enabled) EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST User/Device authentication WPA™, WPA2™ and WPA3™ with 802.1 x or previous key, WEP, Web Captive Portal, MAC blacklist and Permissions list Maximum Tx power (produced) of 1 2.4GHz Radio 23 dBm/200 MW (2 circuits together) Radio 2 5 GHz 22 dBm/158 MW (2 circuits together) Radio 3 no data available Kensington Castle yes IEEE standards 802.11 a, 802.11 b, 802.11 e, 802.11 g, 802.11 h, 802.11 i, 802.11 j, 802.11 k, 802.11 n, 802.11 r, 8-2. Fi 6), 802.1 Q, 802.1 X, 802.3 ad, 802.3 af, 802.3 at, 802.3 az, 802.3 bz Supported SSID types Local bridge, tunnel and grid Radio client capacity Up to 512 radio clients (Radio1 and Radio2) The coexistence of cellular communications yes The LED is off yes OFDMA yes Spatial Reuse (BSS coloring) yes UL Mode MU-MIMO 802.11 yes DL-MU-MIMO yes Improved Target Wake-up time (TWT) Yes