Fiber splicer Sumitomo TYPE-82C+

Intelcom Group, the exclusive distributor of Sumitomo Electric in Georgia, offers the Japanese-made Sumitomo Type 82C optical fiber fusion splicer. The Sumitomo Type-82C uses the Core to Core Alignment method, which means aligning optical fibers by their optical cores. This method reduces signal loss at the splice point several times over. For the Sumitomo Type 82C, the average statistical splice loss is 0.01 dB. The Sumitomo Type 82C weighs 2.2 kg. Splice time is 5 seconds. It has two protection sleeve heaters that can operate simultaneously, and the sleeve heating time is 9 seconds. The device is equipped with a 5-inch touchscreen, which allows fast and full control of the device. A Russian or English interface can be selected according to the user's preference. The Sumitomo Type 82C can be used at temperatures from -10 to +50 degrees, at altitudes up to 6000 meters above sea level. The device has passed international standard tests for water resistance, humidity and drops from height. The Sumitomo Type 82C contains detailed video instructions that can be viewed directly on the device screen. The warranty period of the Sumitomo Type 82C is 1 year. Warranty and post-warranty service is provided in Georgia by Intelcom Group, at the Sumitomo Electric authorized service center. During the warranty period you can take advantage of one free preventive inspection. Optical fiber requirements: Composition: quartz glass Number of optical fibers: one Optical fiber types: SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF(G.657), EDF Optical fiber diameter: cladding: 80 ~ 150 µm, coating: 100 ~ 1,000 µm Cleave length: 5 ~ 16 mm with standard holders. Standard specifications: Splice loss*1: SMF : 0.01dB, MMF : 0.01dB, DSF : 0.03dB, NZDSF : 0.03dB Return loss (typical): 60dB or more Splice time: 5 s (SM G652 quick mode), 7 s (SM G652 standard mode), 7 s (auto mode) Protection sleeve heating time (typical): 9 s (FPS-61-2.6 sleeve, thin 60 mm quick mode) Splice and heating cycles with fully charged batteries*2: approx. 300 (with the BU-16 battery) Optical fiber observation and magnification: observation with 2 CMOS cameras, 380X (magnification: 760X) in X or Y view, 270X in X and Y view. Proof test: 1.96 ~ 2.09 newtons Protection sleeves: 60 mm, 40 mm & Sumitomo Nano sleeves Programs: Splice programs: max. 300, 74 optimized, 226 user-editable Protection sleeve heating programs: max. 100, 24 optimized, 76 user-editable Functions: Splice image recording / splice data storage: 200 images / 10,000 splice records (internal memory only), 50,200/20,000 (with an 8GB SD card) Splice loss estimation: from 0.1dB to 15dB in 0.1dB steps Universal holders: provided, 250 µm, 900 µm tight & loose buffer fiber Holder rotation capability: provided Two protection sleeve heaters: provided User-controllable heater clamps: provided Selective user control of the heater clamp Built-in user guide videos: provided, Automatic optical fiber recognition: SMF / MMF / DSF / NZDSF / BIF / other Automatic electric arc calibration: Automatically compensates for environmental condition changes Remaining splice and heating count shown on screen: provided Dimensions / weight: Dimensions: 128 (width) x 154 (length) x 130 (height) mm Weight: 1.9 kg (without battery) / 2.2 kg (with BU-16 battery) Monitor: 5" LCD color touchscreen Output terminals: DC output: DC 12 V (for JR-6) USB port: USB 2.0 (mini-B type) Data storage: SD / SDHC memory card, max. 32 GB Power supply: AC: AC 100 ~ 240V, 50/60Hz (ADC-1430S) DC: DC 10 ~ 15V Battery: Li-ion 10.8V, 6400mAh (BU-16) Operating conditions: Altitude: 0 ~ 6,000 m, Temperature: -10 ~ +50 °C, Humidity: 0 ~ 95% (non-condensing), Wind speed: up to 15 m/s Storage conditions: Temperature: -40 ~ +80 °C, Humidity: 0 ~ 95% (non-condensing), Battery: -20 ~ +30 °C (long-term) Electrode life *3: 6,000 arc discharges Software update: via the internet Data management: data can be saved, edited and analyzed using computer software Test data: Impact resistance: drop from a height of 76 cm onto 5 surfaces (except the top side) Water resistance: IPx2 equivalent (normal operation after exposure to dripping water at an intensity of 3 mm/min, for at least 2.5 minutes on each of 4 sides tilted 15 degrees.) Dust resistance: IPx5 equivalent. Ability to operate properly after 8 hours of operation in a dusty chamber (containing dust particles 75 µm or smaller). Standard package Main unit: TYPE-82C Optical fiber cleaver: FC-6S Cladding stripper: JR-M03 Battery: BU-16 Power supply unit: ADC-1430 Power cable: PC-AC Car cable: PCV-11 Cooling tray: 1 pc Spare electrode: ER-10 Manual on CD: 1 pc Carrying case with work table: CC-82 *1: Average of final results at room temperature with identical Sumitomo optical fiber. Evaluated by the cut-back method according to the international ITU-T and IEC standards. *2: Splice and heating cycles may vary depending on battery condition and operating conditions. *3: Electrode life may vary depending on operating conditions. Made in Japan https://global-sei.com/sumitomo-electric-splicers/americas/products/fusion-splicer/